Request a Quote on Components Corp Part Number ATP-402-10 and Other Test Equipment Components Today

Mfg Part Number : ATP-402-10

Manufacturer : Components Corp

Main Category : Test And Measurement

Category : Test Equipment

Sub Category : Through Hole Mount Test Points

Description : Atp-402 Series Test Points Provide A Convenient Loop Profiled Anchor For The Board Level "troubleshooting" Of Today's Densely Populated Electronic Circuits In A Configuration Which Is Fully Compatible With Automated, Mass Assembly Processes. These Units Are Supplied On A Tape-And-Reel Format Which Conforms To Most Radial Leaded, Component Insertion Machines And Complies With The Taping Specifications Of Universal Instruments Corporation. Within The Atp-402 Series There Are Two Choices Of Test Point. The Atp-402-1o Provides An Oval Configured Loop And Has Mounting Leads On .100" Centers. The Atp-402-20 Is A Lower Profiled Device With An "above Board" Height Of .150" And Mounting Leads On .200" Centers. Both Of These Units Are Formed From .020" Diameter Copp

Unlimited Electromechanicals is your one-stop shop for Test And Measurement components, such as those with the description “Atp-402 Series Test Points Provide A Convenient Loop Profiled Anchor For The Board Level "troubleshooting" Of Today's Densely Populated Electronic Circuits In A Configuration Which Is Fully Compatible With Automated, Mass Assembly Processes. These Units Are Supplied On A Tape-And-Reel Format Which Conforms To Most Radial Leaded, Component Insertion Machines And Complies With The Taping Specifications Of Universal Instruments Corporation. Within The Atp-402 Series There Are Two Choices Of Test Point. The Atp-402-1o Provides An Oval Configured Loop And Has Mounting Leads On .100" Centers. The Atp-402-20 Is A Lower Profiled Device With An "above Board" Height Of .150" And Mounting Leads On .200" Centers. Both Of These Units Are Formed From .020" Diameter Copp.” You have reached the RFQ page for part number ATP-402-10, a Components Corp listing that we currently have available for purchase on our website. Using the form that we have established below, you are always welcome to request a quote for your comparisons. Within 15 minutes of our staff receiving and reviewing the information you offer, you can expect to receive a response that accommodates your unique needs and restrictions alike while presenting competitive options for part number ATP-402-10.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

To ensure the caliber of this Atp-402 Series Test Points Provide A Convenient Loop Profiled Anchor For The Board Level "troubleshooting" Of Today's Densely Populated Electronic Circuits In A Configuration Which Is Fully Compatible With Automated, Mass Assembly Processes. These Units Are Supplied On A Tape-And-Reel Format Which Conforms To Most Radial Leaded, Component Insertion Machines And Complies With The Taping Specifications Of Universal Instruments Corporation. Within The Atp-402 Series There Are Two Choices Of Test Point. The Atp-402-1o Provides An Oval Configured Loop And Has Mounting Leads On .100" Centers. The Atp-402-20 Is A Lower Profiled Device With An "above Board" Height Of .150" And Mounting Leads On .200" Centers. Both Of These Units Are Formed From .020" Diameter Copp item and other various Test Equipment listings we offer, we enact rigorous quality assurance measures at every step of sourcing and fulfillment. For example, we choose to only stock items from vetted manufacturers we trust, such as Components Corp and others. Furthermore, countless listings undergo varying levels of testing, inspection, and document verification to guarantee fit, form, and function for your benefit. With all of this in mind, begin the purchasing process for part number ATP-402-10, knowing that we will provide an optimal solution that is specifically tailored to you.

Related Electromechanical Components of ATP-402-10

ATP-101-W
Molex

ATP-14009-5
Other

ATP-14009-5
Misc Wire And Cable
Wire Cable Tubing Sleeve

ATP-402-20
Through Hole Mount Test Points
Components Corp

ATP-42-DS-GTB-T155
Crane Connectors

ATP-AA-510
Dies And Punches
Molex

ATP-AA-575-CC
Dies And Punches
Molex

ATP-AA-AF1FG
Molex

ATP-AA-F1FG
Molex

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions