Request a Quote on Components Corp Part Number TP-104-08-03 and Other Test Equipment Components Today

Mfg Part Number : TP-104-08-03

Manufacturer : Components Corp

Main Category : Test And Measurement

Category : Test Equipment

Sub Category : Through Hole Mount Test Points

Description : The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations.

Unlimited Electromechanicals is your one-stop shop for Test And Measurement components, such as those with the description “The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations..” You have reached the RFQ page for part number TP-104-08-03, a Components Corp listing that we currently have available for purchase on our website. Using the form that we have established below, you are always welcome to request a quote for your comparisons. Within 15 minutes of our staff receiving and reviewing the information you offer, you can expect to receive a response that accommodates your unique needs and restrictions alike while presenting competitive options for part number TP-104-08-03.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

To ensure the caliber of this The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations. item and other various Test Equipment listings we offer, we enact rigorous quality assurance measures at every step of sourcing and fulfillment. For example, we choose to only stock items from vetted manufacturers we trust, such as Components Corp and others. Furthermore, countless listings undergo varying levels of testing, inspection, and document verification to guarantee fit, form, and function for your benefit. With all of this in mind, begin the purchasing process for part number TP-104-08-03, knowing that we will provide an optimal solution that is specifically tailored to you.

Related Electromechanical Components of TP-104-08-03

TP-002
Connectors
Other

TP-10-453-2
Concord

TP-10015
Honeywell

TP-100AU
Connectors
Other

TP-101
Connectors
Other

TP-101-01-04
Components Corp

TP-101-01-09
Components Corp

TP-101-10
Through Hole Mount Test Points
Components Corp

TP-101-10-T
Through Hole Mount Test Points
Components Corp

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions